Set your sights on pistol reloading data

Find what you need in four easy steps. Select your cartridge type from the drop-down list. Then select your bullet weight, powder manufacturer and powder type. If you're unsure, or just want options, check as many boxes as you'd like. Click "Get Data" to view results.

Select a Cartridge to Begin
Step 1
Select a Cartridge to Begin
Step 2
Select a Cartridge to Begin
Step 3
Select a Cartridge to Begin
Step 4

Bullet Weight250 GR. HDY XTP

Starting Loads Starting Load: Minimum load required. If a starting load is not populated, it often denotes a subsonic load.
Maximum Loads
Manufacturer
Powder
Bullet Diam.
C.O.L. C.O.L.: Cartridge Overall Length
Grs.
Vel. (ft/s) Velocity: The speed of the bullet in flight.
Pressure Pressure: The force exerted by burning powder measured in Copper Units of Pressure (CUP) or Pounds per Square Inch (PSI).
Grs. Grains: If the value is followed by a C, it denotes a compressed load.
Vel. (ft/s) Velocity: The speed of the bullet in flight.
Pressure Pressure: The force exerted by burning powder measured in Copper Units of Pressure (CUP) or Pounds per Square Inch (PSI).
250 GR. HDY XTP
Manufacturer IMR
Powder SR 7625
Bullet Diameter .452"
C.O.L. 1.595"
Starting Load
Grains 6.0
Velocity (ft/s) 630
Pressure 10,300 PSI
Maximum Load
Grains 7.5
Velocity (ft/s) 796
Pressure 13,700 PSI
Barrel Length: 7.25"
Case: Winchester
Primer: Winchester LP, Large Pistol
Trim Length: 1.280"
Twist: 1:16"

Bullet Weight250 GR. CAST LRNFP

Starting Loads Starting Load: Minimum load required. If a starting load is not populated, it often denotes a subsonic load.
Maximum Loads
Manufacturer
Powder
Bullet Diam.
C.O.L. C.O.L.: Cartridge Overall Length
Grs.
Vel. (ft/s) Velocity: The speed of the bullet in flight.
Pressure Pressure: The force exerted by burning powder measured in Copper Units of Pressure (CUP) or Pounds per Square Inch (PSI).
Grs. Grains: If the value is followed by a C, it denotes a compressed load.
Vel. (ft/s) Velocity: The speed of the bullet in flight.
Pressure Pressure: The force exerted by burning powder measured in Copper Units of Pressure (CUP) or Pounds per Square Inch (PSI).
250 GR. CAST LRNFP
Manufacturer IMR
Powder SR 7625
Bullet Diameter .452"
C.O.L. 1.600"
Starting Load
Grains 7.0
Velocity (ft/s) 768
Pressure 9,600 PSI
Maximum Load
Grains 8.2
Velocity (ft/s) 890
Pressure 13,000 PSI
Barrel Length: 7.25"
Case: Winchester
Primer: Winchester LP, Large Pistol
Trim Length: 1.280"
Twist: 1:16"

Email Data